Map Screen Description; Zoom In/Out; Map Scrolling; Displaying Current Location - Honda MDX Navigation Manual

Map Screen Description

Zoom In/Out

Rotate the Interface Dial knob to
change the map scale. Zooming in
increases the detail, while zooming out
gives you a wide area view. After
changing the scale, give the system a
few moments to update the display.

Map Scrolling

To view other map areas, move the
Interface Dial left, right, up, or down.
The map will shift in that direction. To
return the map to your current location,
press either the MAP/GUIDE,
CANCEL, or BACK button on the
steering wheel.

Displaying Current Location

You can see the current address,
latitude, longitude, and elevation at any
time by doing one of the following:
• Use the voice control system and say
"Display the current location."
• Push in on the Interface Dial while
displaying the map of the current
location, and select Map
Information. Rotate the Interface
Dial knob to select Current
Location.
The Current location screen will
appear on the display.
Getting Started
NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown on
roadside elevation signs, and may
fluctuate plus or minus 100 feet or more.
You can save the current location in
your Address Book by doing one of the
following (if an Address Book PIN has
been set, you need to enter your PIN.):
• Use the voice control system and say
"Save."
• Select Save by rotating the
Interface Dial knob and push in on
the Interface Dial.
Say "Register the current location" on
the map screen, and you can register the
current location without displaying the
Current location screen.
Select Return to return to the previous
screen.
Navigation System 21