Switching Source Signals; Adjusting The Volume - HANNspree LT09-10A1 User Manual

Switching Source Signals

Press the
SOURCE
remote control or the
on the control panel to select the
incoming source signal.
The current source setting CH xx
appears on the top left corner of
the screen; AV1 or AV2 appears
on the bottom right corner of the
screen.
Note:
The TV supports S-Video input in
addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority to
S-video when two signals are detected at the same time. This auto detec-
tion function is only available for AV2.

Adjusting the Volume

Press the
VOL UP button
increase the volume. Press
the VOL DOWN button
decrease the volume. The
volume level is displayed on
the TV.
Press the
MUTE button
remote control to turn the
sound off. The word "Mute"
appears on the top left cor-
ner of the screen and sound
is temporarily turned off.
Press the
MUTE button on the
or press the
remote control
restore the original volume.
button on the
button
TV
to
to
on the
VOL UP button or VOL DOWN
Current source setting
C H 4 0
A V
TV/AV
Volume up
TV
MENU
VOL
CH
Volume down
button to
TV
TV
MENU
VOL
CH
27