Universal Remote Control; Setting Up Your Remote Control - Haier L32F1120 Service Manual

6-3 Setting Up Your Remote Control

The remote control cannot be operated unless the batteries are properly loaded
When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
1
PICTURE
2
ARC CCD
3
4
5
INPUT
MENU
6
7
VOL
-
EXIT
8
USB PLAY/PAUSE
9
REV F WD
DISPLAY GUIDE
10
11
AUDIO
MTS/SAP SLEEP
MUTE
CH+
VOL
+
CH-
RECALL
STOP REPEAT
PREV NEXT
FAVORITE CH.LIST
1.Press to turn on and off the TV.
2.Press repeatedly to cycle through the available
12 picture modes.
3.Press to change the aspect ratio.
13
4.Select a closed caption option.
14
5.Show the input source menu.
6.Press to open the on-screen menu.
15
7. Press CH+ or CH- to go to the next or previous
channel in the channel list. Press VOL+ or VOL- to
increase or decrease the volume.
8.Exit On Screen Display.
9.USB: Press to launch the USB multimedia mode
16
/ Previous / Next
No Function.
17
10.Press to display the TV status information on the top
of the TV screen.
11. Press to display the guide when you are watching
analog or digital channels.
18
12.Press to cycle through the different sound settings.
13.Press to display the sleep timer option.
14.Select MONO, STEREO, SAP in NTSC system.
19
(Analog) TV.
15.Press to change a channel.
16.Press to select the digital sub-channels. For
example, to enter "54-3", press "54", " " . And "3".
20
17.Switches the TV sound on or off.
21
18. Press to confirm selections in an on-screen menu or
to open a submenu.
19.Press to go to the last viewed channel.
20.Open the channel list in TV mode.
21.Open the favorite channel list in TV mode.
- 24 -
serted.
in
/
Stop Play / Pause REPEAT.