Table of Contents
Advertisement
this machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses dur-
ing the entire setup pro-
cess!
this machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
unpacking
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Model G0594 (Mfg. Since 7/11)
SECtION 2: SEtuP
Site Considerations
Location
the chipper/shredder must be placed on a firm,
flat, grass or dirt surface to prevent the machine
from tipping. do Not place the machine on con-
crete, asphalt, or other hard surfaces. the chips
could bounce up from the hard surface and cause
injury.
Working Clearances
Consider the length of the material to be pro-
cessed through the machine and make sure that
there is enough height above the chipper/shred-
der to accommodate the material.
Make sure the unit is located close to the area
where the chips are going to be used to reduce
carrying.
stay clear of the discharge area. Make sure all
bystanders, children, pets, or objects that you do
not want damaged or covered in chips, are clear
of the discharge area.
Items Needed for
Setup
the following items are needed to complete the
setup process, but are not included with your
machine:
Description
•
phillips screwdriver .................................... 1
•
oil (see motor manual for viscosity) ......
Qty
⁄
qt
5
8
-7-
Advertisement
Table of Contents
