Listening To Fm Stations - Grace Digital GDI-IRDT200 User Manual

10. After a successful scan, select your UPnP server, by rotating the knob if there is more than on
UPnP server, and then press SELECT.
11. The radio will now list the media categories available from the UPnP server,e.g. 'Music',
'Playlists' etc. Turn the knob to select which category you wish to browse, press SELECT and
turnthe knob to highlight a sub category and press SELECT again. For example, you could
select'Music' and then 'Album'.
12. Select the music files that you wish to play.
13.The radio will display '[Add to Queue]', press SELECT and the radio will add the tracks to its
queue and begin playing them automatically.

Listening to FM stations

Select FM on the main menu. Press "Select" to confirm and you can listen to your desired FM
stations.
Media Player
FM
1. Push and hold the "Tune/Select" button, it will automatically scan up the FM frequency and play
the next one station, it can scan from 87.5MHz to 108MHz.
Note: You can only scan up 88.8MHz 89.8MHz.
2. If you want to fine tune the FM frequency, you can press the "Select" once to shift the Volume
control function to Frequency control as below
Frequency:
89.8MHz FM
Then you can turn the knob to adjust the frequency up or down to select the station. If you want to
adjust the volume, press the "Tune/Select" button again to switch from the Frequency mode to
Volume control mode.
NOTE: If you want to scan or auto scan the most clear and more stations, please place
your wire antenna (supplied in the package) in the position as far as it can be extend.
How to set the Time/Date
Under <settings> menu, select <Time/Date>, you can then set the time:
Set Time
09:06
Turn the knob to set the hours, then press "Select" to confirm the cursor will
jump to minute, so you can adjust the minute.
The "Select" to finish the time setting,and bring you to set the Date
Set Date
19.MAY.09
13
Turn the knob to set the day ,press "select" to confirm the coursor will jump to month set,and year ,
you ocnfirm all the sets are OK,press "select" to complete the Time/Date seting.
Time and Date
Set
The display will show <Time Set> with the new time for 3 seconds, and then returns to the radio
station display.
How to set the Alarm
1. On the main menu, select <Alarm/Clock> to set the Alarm clock:
Set Alarm
Sleep timer
2. You can select "Disable all" to disable all the alarm settings, or you can set to enable the 5 alarms.
3. Rotate the knob to 1 group of clock alarm setting, then press the SELECT button.
Set Alarm
08:20
4. Adjust your desired time of Alarm.
NOTE: According to different time necessary, you can select your favorite setting for the alarm
setting;
Once/Every day /Weekly /Weekdays / Weekends options are available;
5. There are 3 options of the wake to alarm for you to choose from: Buzzer, Preset Internet radio
station or last listened FM station.
How to set the Sleep Timer
Sleep Timeout
00:45
Select "Sleep Timer" from the Alarm clock menu.
Rotate the Knob to change the sleep timer and then press "SELECT" to begin the sleep timer;
The range of the sleep timer is available from 00:15 to 03:15 < 15 minutes for each step >.
Select OFF to turn off the sleep timer.
How to store and listen the Preset station
When a radio station (FM radio or internet radio) is being played, to store the station as a preset,
press "Pre.Play" once and select the Preset 1. Then press and hold the "Select" key to store the
playing station to preset 1
14