Table of Contents
Advertisement
SET UP
TRANSMITTER
1.
C
onnect the AC power adaptor included with your unit to electrical wall outlet.
2.
P
lug the AC power adaptor included with your unit in the jack located on the
rear of the transmitter. Option 4 X "AA" size ALKALINE batteries can be used
to power the transmitter for portability. NOTE: ensure battery polarity (+/-) are
matched and correctly aligned correct when inserting the batteries in the
compartment
3.
T
urn on the tra
nsmitter by setting the POWER switch to the ON position, and
the POWER LED (blue) on transmitter will start flashing.
4.
T
he retractable audio cord located at the front of transmi
to an audio output jack of any audio source (i-Pod, i-Phone, MP3, Hi-Fi,
MP3/CD/VCD/DVD players, etc.)
5
. When the transmitter receives an audio signal, the blue SIGNAL LED and the
red POWER LED will illuminate together. If the blue SIGNAL LED does not
illuminate, ensure the audio source is turned on and properly connected to the
jack.
tter can be connected
P.3
Advertisement
Table of Contents
