Advertisement
For optimal sonic result, it is essential that vibrations arising within the Logos 3A be
evacuated to the ground effectively. Solid coupling with a very rigid floor is an essential
element in this process. If your speaker support is standing on a suspended floor, position
at least two of the floor contacts above a supporting beam or close to a supporting wall.
Preserve space around the speaker to provide proper cooling.
The ideal system set up allows the waves front created by each speaker section to reach
the listener simultaneously. In order to achieve this, you will need to position the speakers
so they all are at an equal distance from the listener position.
Attention: the front panel of each speaker is the reference point. Each speaker front panel
needs to be placed at the same distance from the listening position.
In case the optimal positioning indicated above cannot be respected because of space
constraints, the Goldmund acoustic processors (Mimesis 16, 16HD and Mimesis 32) allow
adjusting the position delay and the gains digitally. Customized system configurations can
be calculated based on the exact position of your speakers in your system. This will give
you flexibility to position the speakers in your room while still delivering the optimal sound
result.
Contact your local Goldmund representative for more information on our acoustic
processors.
GOLDMUND LOGOS 3A – Infra-Subwoofer Speaker - 6
Advertisement
