Goldmund EIDOS 19D User Manual page 39

15 THE INTIAL SETTINGS MENU contd
Speakers
Audio Output Mode
•
Set in Setup Navigator (Default: 2 Channel)
If you connected this player to a processor using the 6 channel analog outputs, set this to
5.1 Channel; this will enable you to enjoy multichannel sound.
If you connected only the stereo analog outputs, set to 2 Channel. On this setting
multichannel audio is downmixed to 2 channels for stereo analog output.
Notes :
- Even if you set Audio Output Mode to 5.1 Channel, you'll only get sound from all
speakers when playing a multichannel discs.
- When set to 5.1 Channel there is no optical/coaxial digital output when playing DVD-
Audio discs.
- Some DVD-Audio discs don't allow down-mixing of audio. These discs always output
multi-channel audio regardless of the setting made here.
Speaker Installation
•
Set in Setup Navigator (default: L/R: Large | C: Large | LS/RS: Large| SW: On )
You only need to make this setting if you connected this player to your amplifier using the
5.1 channel analog outputs.
This setting does not affect digital audio output.
Use the Speaker Installation screen to tell the player what kinds of speakers you have
connected.
1 - Use the cursor up/down buttons to select a speaker
Note : The L and R, and RS and LS speakers are paired; you can't set them differently.
2 - Press (cursor right) to modify the selected speaker.
3 - Use the cursor up/down buttons to change the current setting.
39
EIDOS 19D Universal Player