Switching On - Goldmund EIDOS 36A User Manual

9

SWITCHING ON

After making sure that everything is connected properly and that the player is plugged in,
press STANDBY on the remote control or any key on the keyboard of the Eidos 36A to
switch the player on.
You can also use the OPEN/CLOSE button to switch on the player and open the disc tray
at the same time.
Playing discs
The basic playback controls for playing CD, SACD discs are covered here.
1 - If the player isn't already on, press STANDBY/ON on remote to switch it on.
2 - Press OPEN/CLOSE to open the disc tray.
3 - Load a disc.
Load a disc with the label side facing up, using the disc tray guide to align the disc. Never
load more than one disc at a time.
4 - Press (play) to start playback.
Basic playback controls
The controls on the remote for playing discs are listed below. The following chapter covers
playback features in more detail.
PLAY :
PAUSE :
STOP :
FAST REVERSE :
Starts playback.
Pauses a disc that's playing, or restarts a paused disc.
Stops playback.
Press to start fast reverse scanning. Press (play) to resume normal
playback.
12