Thank you for choosing a Goldair Electric Vacuum. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully.
Page 3
Front Cover Release Air Intake Duct Power On/Off Wheel Cord Rewind Wand Storage Clip Bag Full Indicator Power Indicator Lights Increase Power Decrease Power Floor Brush Telescopic Tube Crevice Tool...
INSTRUCTIONS FOR USE WARNING: Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding. Use and function Assembling vacuum cleaner Note: Always remove the power plug from the wall outlet before assembling or removing accessories.
Page 5
INSTRUCTIONS FOR USE CONTINUED Motor thermostat Important: This motor is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur turn power switch off and unplug the vacuum cleaner from the wall outlet, change dust bag and clean filters. Allow the unit to cool for approximately 1 hour.
Page 6
Always disconnect the vacuum from the electrical outlet when checking the filters. SUPPORT AND TECHNICAL ADVICE North Shore City, Auckland, New Zealand Monday – Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz...
Page 7
Your Goldair product has been inspected and tested and is guaranteed subject to the following for a period of two years from the date of purchase against defects in workmanship and materials. During this period, such defects will be rectified by repair or replacement of the product purchased.
Need help?
Do you have a question about the GVC400 and is the answer not in the manual?
Questions and answers