Genelec Home Theater System Design And Installation Manual page 10

Residential and home theater loudspeaker systems
Table of Contents

Advertisement

AIW26 In-Wall
The AIW26 is Genelec's answer for the need to hide powerful side and rear
loudspeakers. The AIW26 comes as a complete ported enclosure fitting into a
standard 2 x 4" wall structure. The 6.5" woofer and the ¾" dome tweeter drivers
are each connected to separate 120 W amplifiers housed in the RAM1 amplifier
module. This external unit can be placed in a rack with the source equipment,
placed on a shelf or hidden away near the loudspeaker enclosure. Any 4-core
loudspeaker wire is then run to the loudspeaker enclosure. The 4U high RAM1-
401 is an optional rack mount kit for the RAM1 amplifier module that can house
up to three RAM1 amplifier modules.
AIC25 In-Ceiling
The AIC25 In-Ceiling loudspeaker consisting of a two-way loudspeaker enclo-
sure and a matched remote amplifier module RAM2. The 5" woofer and the ¾"
dome tweeter drivers are each connected to separate RAM2 amplifier module that
can be rack mounted with its dedicated optional 4U high RAM2-405 Rack mount
adapter, or placed on a shelf or into a cabinet. Any 4-core loudspeaker wire (the
cable length defines the required thickness) is then run to the loudspeaker enclo-
sure. The enclosure requires only 158 mm (6 7/32") of free depth inside the ceiling
structure and can easily be retrofitted into existing constructions.
6040A
The 6040A is a radically different product from Genelec with an emphasis on
design, form and acoustic performance. The 6040A can be utilized in either a
stereo system or high-tech multichannel configurations. This stylish enclosure,
inspired by designer Harri Koskinen from Finland, is made entirely from elegant
die-cast aluminium and will fit into any modern environment. The 7" woofer and
the ¾" dome tweeter drivers are each connected to separate 120 W amplifiers
housed in the loudspeaker's base.
5050A Subwoofer
The Genelec 5050A Active Home Theater subwoofer is a powerful and very com-
pact loudspeaker featuring one magnetically shielded active 8" driver mounted on
the front side and two 8" passive radiators, one on each side of the enclosure. A
70 Watt power amplifier is integrated into the subwoofer which has a frequency
response from 25 Hz - 120 Hz and delivers a maximum SPL output of 104 dB with
extremely low distortion levels.
HTS3B & HTS4B Subwoofers
Genelec's Active Home Theater subwoofers, the HTS3B and HTS4B, deliver tight
and powerful bass down to 18 Hz. Both subwoofers share the same design layout
with one magnetically shielded active loudspeaker driver and two passive radia-
tors. The HTS3B has a 10" driver and passive radiators powered by a 200 W
amplifier, whereas the HTS4B has 12" drivers and a 400 W amplifier. Both the
HTS3B and HTS4B have a frequency response from 18 Hz to 120 Hz and the
maximum SPL output is 113 dB and 117 dB respectively.
5

Advertisement

Table of Contents
loading

Table of Contents