Option; Disconnect And Exit - Q-See QSNDVR9M Remote Surveillance Manual

2.9 Option

Press button to setup the "control port", "stream port", "initial mode" and "audio connect".
Control port/stream port: The port must be set as the same as the DVR, and these ports should be
opened.
Initial mode: If the DVR is 9-channel, please choose 9; If the DVR is 16-channel, please choose 16.
Audio connect: Only if this option is chosen is there audio output in the Net Client.

2.10 Disconnect and exit

When the connection to DVR has been established, the
want to disconnect the connection, press this button. A dialogue box pops up——"Are you sure?" Press
"Yes" to disconnect, press "No" to return to the previous menu.
Click button to exit the client program. A dialogue box will pop up——"Do you really want to Exit?
30
button is changed to button. If you