Dual-Stage Manual Knife Sharpener
Product Description
• Perfect for straight edge kitchen, hunting, fishing, and pocket knives. Also sharpens Santoku knives. Not recommended for serrated knives.
• Stage one coarse sharpens with carbide steel using an ideal preset angle. Stage two features crossed ceramic rods to hone the edge razor
sharp.
• Precision angle guides provide no-guess sharpening.
• Soft-grip rubber handle is ergonomically designed for added comfort.
• Non-skid rubber padded base provides steadiness while sharpening.
Sharpening Instructions
1. Place the knife sharpener on a flat, stable surface. Sharpener should be positioned near the edge of the countertop to insure that you do not
inadvertently cut the countertop during sharpening.
2. Grasp the knife sharpener handle with one hand and insert the knife blade in the appropriate sharpening slot:
Coarse – This is the slot closest to the handle. Begin with this stage if your knife is extremely dull or damaged. Follow the sharpening procedure in
step 3. Complete the process by placing the knife in the fine honing slot and repeat step 3.
Fine – If your knife is already sharp and you want to maintain that edge, use the fine-honing slot for touch-up sharpening. Follow the procedure
in step 3.
3. Sharpening Procedure: Pressing down with moderate pressure, slowly draw the blade through the slot keeping the knife level. If the blade has
a sharp curved tip, lift up on the knife handle slightly as the curved portion of the blade is drawn through the guides. Repeat procedure three
to four times or until knife is razor sharp. Note: When sharpening certain types of knives you may notice small metal filings being removed.
This is normal.
4. Before using the knife to slice food, always wipe the knife blade with a damp cloth to remove any metal filings that may remain from the
sharpening process.
Cleaning Instructions
Clean the knife sharpener with a damp cloth or non-abrasive brush. Do not rinse with water.
Consumer Service Information
If you have any questions regarding the operation of your Presto
• Call 1-800-877-0441 weekdays 8:00 AM to 4:30 PM (Central Time)
• Email us at our website www.GoPresto.com
• Write: National Presto Industries, Inc.
Consumer Service Department
3925 N. Hastings Way, Eau Claire, WI 54703-3703
Inquiries will be answered promptly by telephone, email, or letter. When emailing or writing, please include a phone number and a
time when you can be reached during weekdays if possible.
Any maintenance required for this product, other than normal household care and cleaning, should be performed by our Fac-
tory Service Department. Be sure to indicate date of purchase and a description of defect when sending a product for repair.
Send products for repair to:
The Presto Factory Service Department is equipped to service all PRESTO
PRESTO
replacement parts are manufactured to the same exacting quality standards as PRESTO
cifically to function properly with its products. Presto can only guarantee the quality and performance of genuine PRESTO
"Look-alikes" might not be of the same quality or function in the same manner. To ensure that you are buying genuine PRESTO
replacement parts, look for the PRESTO
This quality PRESTO
under normal household use. Presto pledges to the original owner that should there be any defects in
material or workmanship during the first year after purchase, we will repair or replace it at our option.
Our pledge does not apply to damage caused by shipping. To obtain service under the warranty, return
this PRESTO
product, please include a description of the defect and indicate the date the product was purchased.
We want you to obtain maximum enjoyment from using this PRESTO
read and follow the instructions enclosed. Failure to follow instructions, damage caused by improper
replacement parts, abuse or misuse will void this pledge. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state. This is Presto's personal pledge to
you and is being made in place of all other express warranties.
2010 by NPI, Inc
Canton Sales and Storage Company, Presto Factory Service Department,
555 Matthews Dr., Canton, MS 39046-0529
trademark.
PRESTO
product is designed and built to provide many years of satisfactory performance
product, shipping prepaid, to the Presto Factory Service Department. When returning a
NATIONAL PRESTO INDUSTRIES, INC. Eau Claire, WI 54703-3703
product, contact us by any of these methods:
products and supply genuine PRESTO
LIMITED WARRANTY
products and are engineered spe-
product and ask that you
Form 72-939A
parts. Genuine
parts.
Need help?
Do you have a question about the Dual-Stage Manual Knife Sharpener and is the answer not in the manual?
Questions and answers