O Selecting Disc Languages - Zenith DVD2250 Operating Manual & Warranty

PAGE 34 I INITIAL SETUP OPERATION
Selecting disc languages (DVD only)
This is to select the audio soundtrack language,
subtitle language and the language used in title
menus or DVD menus which will always be used
for every disc to be played back.
At the setup screen
U Press JJV to select "Disc Audio" and press
I_.
When you play back a DVD video disc, the DVD
video player automatically displays the pre-
selected subtitle language if it is included on the
disc.
j
D D"
lille
.0(2)(:::) .
2 o-O;
®®®
(9@@
U Press _iJY to select the desired language and
then press SELECT/ENTER.
Original : The original language of each disc will be selected.
English : The English will be Selected.
Other : Another language can be selected. (Refer to the lan-
guage codes on page 40. Press CLEAR if an incorrect lan-
guage code is entered.)
The Disc Subtitle and Disc Menus are selected by the same
method.
The screen illustrated in step 1 is displayed. Press
_k/V/'_/l _ to select RESUME and press SELECT/ENTER to
returns to the initial settings screen.
0 If the language selected is not available on the dlsc, the odginal
language designated by each disc will be selected.