Table of Contents
Advertisement
5. Ropeguide Setupas followsin Step5:
a. Holdthe bladecontrol againsttheupper handle.
b. Slowlypull starterrope out of engine.
c. Slip starterrope intothe rope guide.
d. Tightenropeguide wingnut.
6. Eachwheelhasa heightadjustmentleverto change
the cuttingheightof the mower.
a. Depressheightadjustmentlevertowardswheel.
b. Slide leverto desiredpositionfor a changein
cuttingheight.See Step6.
c. Releaselevertowardsdeck.
7. Installmulchingbaffleon the rightsideof the mower
followingthe stepsbelow:
a. Lift up and hold the side-discharge chute deflector
and insert bottomlip of the mulchingbaffle inside
the chuteopeningSee Step7.
b. Snap hooksd the mulchingbaffle overthe hinge
pin of the chute deflector.Thehooks mustsnap
into placeon the hingepin, lockingthe mulching
baffle firmlyonto mower.Releasechutedeflector.
Step 5
Step 6
CUTTINGHEIGHT
Step 6
All wheels must be
placed in the same
relativeposition. For
rough or uneven lawns,
movethe height adjust-
ment lever to a higher
position,This will stop
scalping of grass.
MULCHING BAFFLE
Step 7
For proper assembly,
install bottom lip inside
chute opening before
placing hooks over the
hinge pin.
iMPORTANT
This unit is shipped
without gasoline or oil
in the engine. Fill up
gasoline and oil as
instructed in the engine
operation section
BEFORE operating
your mower.
Step 7
7
Advertisement
Table of Contents
