Using Your Oven - Whirlpool RB1000XKW0 Use & Care Manual

Using your oven
Automatic MEALTIMER _ Clock Start Time Knob
Adjustable
Oven Selector Oven Temperature Control
Minute Timer
Stop Time Knob Manual Oven Light Switch Oven Signal Light
SETTING THE CONTROLS
BAKING
I. Put oven racks where you want them.
[See page 5 for suggestions.]
2. Set Oven Selectorto BAKE.
3. Set Oven Temperature Control to the bak-
ing temperature you want,
4. Let the oven preheat until the Signal Light
goes off.
S. Put food in the oven.
6. When done baking, turn both knobs to
OFF,
During baking, the elements will turn on
and off to help hold the oven temperature at
the setting. (The top element wlll never turn
red, but wlll be hot.) The Slgnal Light wlll turn
on and off wlth the elements.
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradu-
ally over the years, The accurate setting of your new oven can seem different.
If you think the oven temperature needs adjusting, follow these steps:
1
Pull out the center
of the Oven Tem-
perature Control.
Locking Screw Tooth c e ches
2.
Loosen the lock- 3.
ing screw.
To lower the tem-
perature, move
black ring so tooth is
closer to LO. Each
notch equals
about IO'F [5 C),
4.
To raise the tem-
perature, move black
ring so tooth is
closer to HI. Each
notch equals
about 10 F (5 C].
4 Tlghten the locklng screw. Replace the knob. :Tmk