Table of Contents
Advertisement
L310GB.book Page 41 Thursday, January 17, 2008 9:44 PM
Z Connecting
Matters
Problems
There is no image
or sound on the
TV.
Connecting to TV
The TV image is
black and white.
PC does not
Connecting to PC
recognize the
camera.
Connecting to
Cannot print with
printer
PictBridge.
Z Others
Matters
Problems
Nothing happens
when pressing the
buttons on the
camera.
Camera operation
etc.
The camera no
longer works
correctly.
Possible causes
The camera is not connected to the TV
correctly.
The included A/V cable was connected
during movie playback.
"TV" is selected as the TV input.
The video output setting is incorrect.
The TV volume is turned down.
The video output setting is incorrect.
The USB cable is not correctly connected
to the PC or camera.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
Possible causes
Camera malfunction may be caused
temporarily.
The batteries have run out.
Camera malfunction may be caused
temporarily.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to "VIDEO".
Change the setting to [NTSC] or [PAL].
Adjust the volume.
Change the setting to [NTSC] or [PAL].
Set up the camera, and connect the USB cable
correctly.
• Set up the camera, and connect the USB cable
correctly.
• Turn the printer on.
Solutions
Briefly remove the batteries or disconnect the AC
power adapter. Then reload the batteries or
reconnect the AC power adapter and try again.
Load new or fully charged batteries.
Briefly remove the batteries or disconnect the AC
power adapter. Then reload the batteries or
reconnect the AC power adapter and try again. If
you think the camera is faulty, contact your
FUJIFILM dealer.
41
Advertisement
Table of Contents
