Using The Remote Controller (On The Zoom Date 90Sr Only) - FujiFilm Zoom Date 90 SR Owner's Manual

1
A
2
42
USING THE REMOTE CONTROLLER
(on the Zoom Date 90SR only)
B
A FUJIFILM remote controller is required.
C
Remove the remote controller from its holder by sliding it in the direction of the
arrow.
A : Remote controller holder
B : Transmitter
C : Shutter release button
∗
To replace the remote controller in the holder, slide the remote controller in the direction oppo-
site to the arrow until it clicks into position.
∗
The specific remote controller used may be different than the one shown in the picture.
Press the
∗
The remote control mode is displayed after the self-timer mode.
∗
The exposure modes can also be selected in the remote control mode.
button, until " " appears on the LCD.