Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,
including the following:
•
Read all instructions
before using the dryer.
•
Do not place items exposed to cooking
oils in your dryer.
Items contaminated
with cooking
oils may contribute
to
a chemical reaction that could cause a load to catch fire.
•
Do not dry articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry-
cleaning solvents, or other flammable or explosive
substances
as they give off vapors that could ignite or
explode.
•
Do not allow children to play on or in the dryer. Close
supervision
of children is necessary when the dryer is
used near children.
•
Before the dryer is removed from service or discarded,
remove the door to the drying compartment.
•
Do not reach into the dryer if the drum is moving.
•
Do not install or store the dryer where it will be exposed
to the weather.
•
Do not tamper with controls.
•
Do not repair or replace any part of the dryer or attempt
any servicing unless specifically recommended
in this
Use and Care Guide or in published user-repair
instructions
that you understand and have the skills to
carry out.
•
Do not use fabric softeners or products to eliminate static
unless recommended
by the manufacturer of the fabric
softener or product.
•
Do not use heat to dry articles containing foam rubber or
similarly textured rubber-like materials.
•
Clean lint screen before or after each load.
•
Keep area around the exhaust opening and adjacent
surrounding
areas free from the accumulation
of lint, dust,
and dirt.
•
The interior of the dryer and exhaust vent should be
cleaned periodically
by qualified service personnel.
•
See installation instructions
for grounding requirements.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Gather the required tools and parts before starting installation.
Parts supplied
Read and follow the instructions
provided with any tools listed
Remove parts package from dryer drum. Check that all parts are
here.
included.
•
Flat-blade screwdriver
•
Vent clamps
•
#2 Phillips screwdriver
•
Caulking gun and
compound
(for installing
•
Adjustable wrench that
opens to 1" (2.54 cm) or
new exhaust vent)
hex-head socket wrench
•
Tin snips (new vent
(for adjusting dryer feet)
installations)
•
Wire stripper (for direct
•
1/4"nut driver or socket
wire installations)
wrench (recommended)
•
Level
•
Tape measure
A
B
C
D
E
A. Levefing Legs(4)
B."Y'connector
C. Short _lethose
D. Inlethose
wi_right-ang#
connector
E Rubber washer
NOTE: Do not use leveling legs supplied with dryer if installing on
a pedestal.
Hide quick links:
Advertisement
Table of Contents
