Table of Contents
Advertisement
b) In operating mode, use the provided USB cable to connect the device to a computer. All data stored
on the internal memory of the device and on the Micro SD card can be accessed in read / write mode.
At this time, the LCD segment screen will display the USB connection icon.
Note:
If you don't have the USB power adapter, the battery inside of the device can be charged by the USB
port of the computer by the use of the provided USB cable.
13. Key tone indication
a) Press "Record" or "Shutter" key in normal use and the device will tick one time to confirm the
operation.
b) When video recording is stopped, the device will tick twice.
c) Device will tick twice to indicate the successful pairing with the remote control.
d) If you press "Shutter" key during video recording, the device will not give a confirmation.
e) If the system is video recording mode an you press the "Stop" key on the remote control, the device
will tick twice to indicate the stopping of video recording.
f) Pressing any key on the remote control in if the device is in standby mode, the device will tick one
time and wake up out of the standby mode.
g) To turn off the key tone, press "M" key in preview mode, then press ">" or "<" key to enter the
"Setup", press "+" or "-" key to select the menu "Key Tone", and then you can turn on or turn off the key
tone.
28
Advertisement
Table of Contents
