Fantasea FS-5 Operator's Manual page 7

10: Center
[N2]
This button authorizes the selections made when the Delete,
Menu and Rotary Multi selector buttons are used. Must be
swiveled into place when pressing OK and see that it does
not interfere with the action of the Rotary Multi Selector
button.
Before making a selection from the Rotary Selector
button, be sure the flange of the OK button is moved
Note!
away from the Multi Selector field. You may have to
move the Delete button flange to a different position to
accommodate proper placement of the OK button.
11: Rotary
[N3]
The rotary multi selector is used to navigate the camera menus.
Rotate in any direction to highlight items and press the center
OK [#10] button to confirm selection. To cancel and return
to the previous menu, press the rotary multi selector to the
left. Highlighted options are found when pressing this rotary
dial left, right or up and down.
Once you have made your selection on the Rotary
Selector, swing the flange around of the OK button
Note!
directly over the 'confirm' area in the center of the
Rotary Selector and press down on the OK button to
validate your selection.
12: Menu
[N4]
To display the Shooting menu, select the shooting mode
[button #8] and press the Menu button. For Playback menu,
the playback mode must be selected and press the Menu
button. To display the Set Up menu, select setup from the
shooting, playback, scene, movie etc menus.
It is strongly recommended that you familiarize yourself
Note!
with all the controls topside before using these controls
while diving.
OK button:
Multi Selector:
button:
6