Table of Contents
Advertisement
The Coolpix FS-6 is six (6) mega pixels. With high resolution
and the outstanding quality of other Nikon features, such as optical
performance, you will be able to produce high quality images of
the thrilling outdoor activities in which you participate. These
cameras were selected as the basis for the housing design due to
the combination of image quality and consumer value. For specific
features of each camera you should reference your camera s
instruction manual or obtain product technical information from
Nikon or their dealers.
Nikon COOLPIX S6 Feature Highlights
Pictmotion With High-Quality Music
Nikon's new Pictmotion is much more than a simple slideshow function.
TM
Available on both the COOLPIX S5 and COOLPIX S6, it allows you
to select your favorite images and movie files, then pick a style and add
a music file of your choice from among 5 pre-installed ones, or load
your own choice of music to suit the images.
Eye-Catching Wave-Surface Design
7
The COOLPIX S6 has been created with a unique wave-surface design
that is both esthetically appealing and very comfortable in the hand.
Large LCDs
The COOLPIX S6 features large 3.0- inch 230,000-dot TFT LCD. Such
generous size does away with the need for a viewfinder and makes for
easier composition especially when underwater.
Rotary Multi Selector and Improved Gui
Operation has been made smoother, simpler and faster. A new Rotary
multi selector incorporated into the camera back enables high-speed
image browsing with circular scrolling action at up to 10 frames per
second, while a range of buttons built into the Rotary multi selector
make for more intuitive operation.
Built-in Wi-Fi
The COOLPIX S6 features the additional advantage of built-in Wi-Fi
capability to add further enjoyment and flexibility to digital photography.
Using the Fantasea FS-6 housing:
Opening The Housing:
1.
Observe that the locking mechanism has a single spring tab.
2.
Pinch the Latch Buckle Release Tab with one hand. While
pinching the tab, pull the latch open. The latch is hinged on
the front half of the clamshell.
3.
Pulling the latch toward the rear of the housing will unclip the
latching buckle and allow it to swing free--for opening.
Inserting Camera:
Since the Fantasea's FS-6 was specifically designed for the
Coolpix S6 digital camera, insertion is a simple matter of placing
the camera in the housing.
1.
Make sure the camera lens is centered in the rounded port area
and that the lens does not distort the round black rubber seat.
The housing is designed to have the camera fit in place perfectly,
but if you are not careful, it is possible to put it in at an improper
angle and hence it will be impossible to get a good seal or easy
closure of the housing.
2. After camera insertion, be sure that the extended camera lens
does not catch or bend the black rubber seat on the inside of
the lens port. It is vital that the lens does not disturb this
rubber seat.
It is recommended to make some camera
1.
settings prior to inserting into the housing.
Please refer to the Coolpix owner's manual
for menu options and personal preferences to
choose from.
Notes:
Take a few test shots: it is recommended to
2.
turn the camera "on" and program to "Flash
Always" mode before inserting into housing
and then take test shots to make sure all
systems are working.
8
Advertisement
Table of Contents
