Table of Contents
Advertisement
1.
Select
a CYCLE
Set
2.
TEMPERATURESELECTOR
Turn the Control Knob either way to
point to the cycle
and setting you
want. See page 6 for information
on
the cycles.
3.
Push the START Button
The Temperature
Selector
can be set
on any desired
temperature
or any-
where between
2 temperatures.
To stop and restart
the dryer
The dryer will start tumbling
when you
push the STARTButton.
If the STARTButton is pushed
when the
Cycle
Control Knob is pointing
to an
OFF area, the End-of-Cycle
Signal will
sound. Dryer will not start.
To stop the dryer, open the door (or
turn the Control Knob to OFF].
To restart the dryer, close the door,
select cycle,
if necessary,
and push
START.
The Cycle
Control Knob should point to an OFF area when the dryer is
not In use. If the dryer is stopped
before the cycle is finished, turn the Cycle
Control Knob to an OFF area.
5
Advertisement
Table of Contents
