Table of Contents
Advertisement
Figure 4-18: Manage AutoConfig Web Page
4.3.4 View AutoConfig Status
The View AutoConfig Status subcategory, shown in Figure 4-19, provides status
information that shows if devices have been discovered and fit the criteria of existing
AutoConfig rules along with the profile application status.
When AutoConfig is disabled on the Manage AutoConfig web page newly discovered
Zero Clients will not appear on the View AutoConfig Status web page.
Below is a description of each status category:
•
not started – The MC has not yet checked this device for AutoConfig rule
compatibility.
•
failed
AutoConfig criteria.
•
failed offline
criteria.
•
failed IP range check
criteria.
•
failed password check (no password)
password setting for this rule.
•
failed password check (no match)
criteria for this rule.
•
added to group
proceed to apply the profile.
TER0812002 Issue 5
– The device failed to be added to this group for a reason other than
– The device could not be reached for verification of AutoConfig rule
– The device does not match the AutoConfig rule IP range
– The MC has completed adding the device to this group and will
PCoIP Management Console User Manual
– The device does not match the no
– The device does not match the password
55
Advertisement
Table of Contents
