Front Panel - Toshiba SD-5970SU Owner's Manual

iii_" _ iii,i!ii_ _
:: nnecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see [_.
Signal Flow
J
audio inputs
red)
(white)
To S video input
connect the DVD video pmayerwith
an S video cable.When using an
S video cabBe, do not connect the
yellow video cable and component
video cables (Y/PWPR).
• ANALOG/HDMI SETTING
In standby mode, select ANALOG mode through the
ANALOG/HDMI switch on the front panel.
TV or monitor with
audio/video inputs
Make the following setting.
On-screen display Select: Page
"Digital Out .... PCM" or "Raw' [_ [_
CVBS
Video Output" * YUV _ [_
Onlyfor analog video out jack (yellow) connection with
progressive scan off.
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
• Do not set the ANALOG/HDMI selection other than standby mode.
18