Connecting An Audio System - Sony KP-53XBR200 Operating Instructions Manual

Connecting an audio system
For more dynamic sound, connect your audio
system to your projection TV.
1 Using AUDIO connectors, connect AUDIO
(VAR) OUT on your projection TV to one of
the unused Line inputs (e.g. Tape-2, AUX1,
etc.) on your stereo (White-AUDIO Left, Red-
AUDIO Right).
2 Set your stereo to the chosen Line input
and use the AUDIO menu to switch
projection TV's speakers off. (see
"SPEAKER" on page 38)
Note:
• You can adjust VOLUME, BASS, TREBLE
and BALANCE through the projection TV
on AUDIO (VAR) OUT only.
Disconnect all power sources before making any connections.
(Rear of projection
TV)
@ e
¢.Bm_ m m
AUDIO (VAR) OUT-L
(white)
AUDIO (VAR)
OUT-R (red) (not supplied)
Line input
Stereo amplifier
17