Sony Trinitron KV-27S35 Operating Instructions Manual page 10

Connecting two VCRs for tape editing using MONITOR OUT
• KV.27V25127V35129V35CI29V65MI29V75MI32V251
32V35134V35CI35V35135V45135V75 only
MONITOR OUT allows you torecorda program thatis
on the screen.
(Rear of
TV)
VCR (for playback)
I AUDIO VIDEO
I
VMC-810S/820S
(not supplied)
-- -- S VIDEO
OUT CONTROLS
OUT
AUDIO-L (white)_ V
VIDEO (yellow) ,_
VCR (for recording)
AUDIO VIDEO
[ ,UNE iN
_ m m
I
VMC-810S1820S
(not supplied)
The above type of connection should only be used
when you connect from the line input of one VCR, and
from the line output of a second VCR.
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• You can use the S video jack to connect a VCR for playback
and the composite video jack to connect a VCR for recording.
• When connecting a single VCR to the TV, do not connect the
MONITOR OUT jacks at the rear of the TV to the VCR's line
input, while at the same time connecting from the TV's VIDEO
IN jacks to the VCR's line output, as shown below.
X (Rear of TV)
EO ,NITl ITIMONITORI
OUT I
VCR L_ L_ LINE
Using the S-Link function
• KV-27V25127V35129V35C/29V65M129V75M/32V251
32V35/34V3$CI35V35135V45/35V75 only
The S-Link feature allows you to operate the TV and
VCR with the S-Link function in the following ways:
• When you press the VCR's play button, the TV's
input mode is automatically changed to video, and
the VCR starts playing a tape. ..
VCR
• When you press the VCR's stop button, the TV
automatically returns to the previous input mode.
• You can turn off the TV and VCR together using the
SYSTEM OFF button (see page 35 for details).
Note
• The TV may malfunction ifyou connect theS-Link cableto the
TV without cor_necting t he other end of thecable to theVCR.
(Rear of TV)
10 {
Getting
AUDIO VIDEO
@@@s._
Started
VIDEO (yellow)
AUDIO-L (white)
!
Audiolvideo cable
_3]:) I
(not supplied)
S-LINK OUT
IN
_DEO1' VIDEO _
m B SVIDEO
@.® ,--
@--
@@
@@