Sony Trinitron KV-27S10 Operating Instructions Manual page 21

• KV-27510/27V10/32510 only
Some source programs are provided with Caption
Vision (Closed Caption). To display Caption Vision,
select either CC1, CC2, TEXT1, or TEXT2 from the
menu.
CC1 or CC2 shows you a caption, that is a printed
version of the dialog or sound effects of a program.
(The mode should be set to CC1 for most programs.)
TEXT1 or TEXT2 shows you text, that is information
presented •using half to full of the screen. It is not
usually related to the program.
A+ or V-
1 Press MENU.
mMENU
RETURN
2
Press A+ or V- to select CAPTION VISION and
press RETURN.
3
RETURN LIcAPTIONVtSION l
II'i'_/TEXT OFFI_2 _1TEXT2TEXT 1
I :_MENU
I,Use # _ Exit J_
Press A+ or ?- to select the caption type
and .press RETURN.
(R) RETURN ICAPTION vtsIoN
(_ J r_/TEXT OFF
Rm2
k_(L
I TEXT_
I TEXT2
I :_IENU
,Use _ _ Exit
Note
• Captions may appear with a white box or another error instead
of a certain word. Poor reception of TV programs can also
cause errors in Caption Vision.
• KV-27V10129VlOCI29V10M only
You can operate Sony or non-Sony video _,tdll_,_,_cl_t
that has an infrared remote sensor with the supplied
remote commander. For this operation, set the
manufacturer's code number.
Setting the manufacturer's code
ooo]
OOOl
OOOl
CODE SET-- _ (_
-- 0-9 buttons
w ENTER
While pressing CODE SET, press 0 - 9 to enter
the manufacturer's code number (see the chart
on the next page). For example, to operate a
Sony 8 mm VCR, press 0, 2 and ENTER.
CODE SET ENTER
Operations
21