Sony SLT-A35 Instruction Manual page 37

ff dust or debris enters the camera and adheres to the image sensor (the part
that acts as the fihn), it may appear as dark spots on the photo image,
depending on the shooting environment. If there is dust on the image
sensor, clean the image sensor following the steps below'.
Notes
• Cleaning cannol be performed whell the battery level is 50_/( or less.
• The camera starts beeping it"the banery pack becomes low during cleaning. Stop
cleaning immediately and turn the camera off. The use o[ an AC=PW20 AC Adaptor __,
(sold separately) is recommended. _'"
€._
• The cleaning should be completed quickly. _.
• Do not use a spray blower because il may scaner waler droplets inside the camera m
body.
Tocleanthe imagesensor automatically u singthe cleaning modeofthe
camera
-o
1 Confirmthatthebattery isfullycharged (page23).
2 PresstheMENUbutton, t hen
select% 2 with_1/1_ on the
control b utton.
MENU button
3 Select[Cleaning Mode] w ithA_,
thenpress thecenter ofthe
control b utton.
......
37