Advertisement
II
Setting
up the headphones
Install the supplied
batteries
into the
headphones.
(1) Open the battery compartment
lid by pressing
on
the Iid as illustrated.
(2) Insert two size AA (R6) batteries
into the
compartment
with correct polarity and close the lid.
Battery
life
When used continuously,
the batteries wzll last:
-- up to 80 hours with size AA (R6) alkallne batteries or
-- up to 40 hours with size AA (R6) manganese
batteries.
Replace both batteries with new ones when the sound
deteriorates.
I
Using the headphones
MODE _
'Q
Low posRlon --_"
_
_
_
I
1
Press HEADPHONES.
The Q display
appears
for about three seconds.
Selected channel number
'° I
2
Turn on the headphones.
The power turns on automatically
when you put
the headphones
on (when
the right housing
is
pushed).
3
Adjust
the
headphones'
volume.
If you want to only listen to the sound
from the
cordless
headphones,
turn down the TV speaker
volume or press MUTING.
To turn off the sound from the TV's speaker
Press VOL - until the sound disappears,
or set
SPEAKER to CENTER (see "Setting the speakers"
on
the previous
page 21).
To turn off the headphones
Remove the headphones
from your head (the power
turns off automatically),
then press HEADPHONES.
(_
OOFF I
To improve
sound reception
• Do not cover the infrared transmitter
on the TV.
• Do not cover the infrared sensors on the headphones.
Infrared
transmitter
Infrared
sensors
Notes
The sound
characteristics
heard
through
the headphones
cannot be modified
in the same manner
as the sound
characteristics
heard
through
the TV's speakers.
Treble,
bass and balance
settings
are fixed. Surround,
OSE and
muting
features
are not available.
• After you have
finished
listening
with the headphones,
it is
recommended
that you remove
the headphones
boom your
head before
pressing
HEADPHONES.
Otherwise
noise
wilt be
heard
through
the headphones.
• To prevent
hearing
damage
due to sudden
or prolonged
excessive
volume,
do not raise the headphones"
volume
too
high while
listening.
Operations
I
23
Advertisement
