Sony BRAVIA KLV-40U100M Operating Instructions Manual page 42

Lcd hdtv monitor
Hide thumbs Also See for BRAVIA KLV-40U100M:
Table of Contents

Advertisement

Troubleshooting
No picture.
No picture.
FI
Check
Power
Saving
settings
(page 41).
The unit turns off automatically.
_
Check
if Sleep
Timer
is activated
(pages 31,40).
No picture
from some video
_
Check
the connection
between
the video equipment
and the unit.
sources.
_
Press V] to V5 on the remote
control
(page
28) or press INPUT
repeatedly
on the top panel (page
13).
Poor picture.
No color/D:trk
picture/The
_
Press PICTURE
to select the desired
Picture mode
(pages
28).
picture
is too bright/Color
is not
_
Adjust the Picture
Mode options
in the Picture
settings
(page
33).
correct
Noisy picture.
_
Keep the set-top box/VCR
antenna
cable away from other connecting
cords.
Do not use 300-ohm
twin lead cables
as interference
may occur.
No sound/Noisy
sound.
Good piciure;
n° s°nnd.
_
Cheek
the vohnne
Coi{troi.
Press MUTING
or VOl
+ so that "Muting"
disappears
from the screen
(page 28).
Disconnect
3,our headphones.
Audio noise.
_
Keep the set-top box/VCR
antenna
cable away from other connecting
cords.
Striped
noise during
_
This is caused
by video head interference.
Keep your VCR away from the
playhack/recording
of a VCR.
unit.
021
Leave a space of 30 cm ( 11 7/8 inches)
between
your VCR and the unit to
avoid noise.
Avoid installing
your VCR in front of the unit or at the side of the nnit.
Wide
Screen
Mode
changes
_
The current Wide Screen Mode
setting is automatically
replaced
with the
automatically.
4:3 Default
setting
when you change
the video input, if 4:3 Default
in the
Screen settings
is set to other than Off. If you want to lock in the Wide
Screen Mode selected
with the WIDE
button,
set 4:3 Default
to Off in the
Screen settings
(page 36).
Remote
control
does not operate.
_
Check
the polarity
of the batteries
or replace
the batteries.
Point the remote
control
at the remote
control
sensor of the nnit.
Fluorescent
lamps can interfere
with remote
control
operation:
try turning
off the fluorescent
lamps.
Keep the remote
control
sensor area clear from obstacles.
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravia klv-32u100m

Table of Contents