Sharp AQUOS LC-46LE700UN Operation Manual page 26

On=Screen Display Menu
For adjusting a picture's horizontal and vertical
position.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
o For resetting adjustments to the factory preset values,
press A/T to select "Reset", and then press ENTER.
When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
Adjustments are stored separately according to input
SOUrCe.
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
When this function is set to "On", the LED on the front
of the TV turns on.
"On" is the factory preset value. If you want to turn off the
LED, set the function to "Off".
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays on the
screen.
o If you have already set the Secret No., input the 4-digit
secret number here.
2 Select "Yes".
o "Now, TV will restart automatically. OK?" displays on the
screen.
3 Select "Yes".
o "Now initializing..." displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
The Channel Setup settings will not be changed.
The Language settings will not be changed.
The Secret number settings will not be changed.
The TV Location settings will not be changed.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
iMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 26 to 27):
1. Secret No. is registered.
2. V-Chip/V-Chip (DTV Only) settings have been made.
® The "V-Chip (D_/Only)" will only be selectablewhen a new
rating system carl be downloaded via digital broadcasting in the
U.S.
3. "Status" is set to "On".
== New Secret No.
You can set and change the secret number by using
0-9.
Input Secret No.: When you change the secret number,
enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm: Enter the same 4-digit number you set in
"New Secret No.".
Secret No. Clear
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On: Enables ParentalCTRL.
Off: DisablesParentalCTRL.
Q- 25