Advertisement
On-Screen
Display
Menu
6 During
the data checking,
"Checking"
blinks.
Checking
7 Press ENTER
to start updating.
o The screen becomes dark tor a while until the update
screen can be displayed. Please wait tor the update
screen to appear. Do not unplug the AC cord.
o The current version of the TV software and the version
ot the update file on the USB memory device are
displayed. To update the TV software with the update
file, select "Yes", and then press ENTER.
Example
!
Example
o If the USB memory device is not properly installed or the
correct update file cannot be found on the USB memory
device, an error message is displayed.
o Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
, Do not remove
the USB memory device or unplug the
AC cord while the software
is being updated.
8 When the software
is successfully
updated,
a
screen
is displayed
indicating
that the update
process
is completed.
After this screen
is displayed,
the TV automatically
turns off and then turns on again.
Example
o If the update has tailed, check the file in the USB
memory device and try So.are
Update again.
g After the screen shown
below is displayed,
press
ENTER.
10 Remove
the USB memory
device.
27
Advertisement
