Setting The Time; Using The Sleep Timer; Setting The On/Off Timer - Samsung LN40D630M3FXZA User Manual

Basic Features
SPDIF Output
SPDIF (Sony Philips Digital Interface)is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
[] Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
[] Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms - 250ms).
Sound Reset (OK! CanceO ....................................................................................................
Reset all sound settings to the factory defaults.
Setting the Time
[_ MENU ml -_ Setup -_ Time -_ ENTER IZ_
Time
The current time will appear every time you press the
_NFO button.
[] Clock: Setting the clock is for using various timer
features of the TV,
if you disconnect the power cord, you have to set
the clock again,
Clock Mode: Set up the current time manually or
automatically.
Auto: Set the current time automatically using the
time from a digital channek
The antenna must be connected in order to set
the time automatically.
Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct, in this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
Available only when Clock Mode is set to
Manual.
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
!
[]
DST (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
MENU rlTI --_ Setup _ Time --_ Sleep Timer
ENTERI_
Sleep Timer _ : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the Sleep Timer, select
Off.
Setting the On/Off Timer
(_ MENU rlTI --_ Setup _ Time --_Timer 1
ENTERI_
[] Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, am/pm and
activate/inactivate. (To activate the timer with the setting
you have chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select -iV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to rv): Select Air or
Cable.
8 English