Samsung PPM42S3 Owner's Instructions Manual page 23

BN68-00457B-01 ENG 2003.10.23 3:21 PM Page 23
[
Adjusting the Picture Settings
Your PDP has several settings which allow you to control picture
quality.
1 Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the _- button.
3
Press the _, or T button to select Adjust. Press the _" button.
Result: The Adjust menu is displayed.
Press the A or T button to select the option (Contrast,
Brightness, Sharpness, Color, Tint-NTSC
only)
tobe
adjusted. Press the _ or _- button.
Result: The horizontal bar is displayed. Move the horizontal
bar's cursor left or right by pressing the _1 or l_ button.
5 When you are satisfied with the settings, press the _ button to
store them.
6 Press the MENU button.
Result: The options available in the Picture group are
displayed again.
7
Press the A or T button to setect Color Tone. Select the option
by pressing the _1or l_ button. The color tones are displayed in
the following order.
Normal - Warml - War_2 - Cool2 - Cooll
]f you make any changes to these settings, tile picture
mode is automatically switched to the custom.