How To Use; Power Switch - Eureka 160 Series Owner's Manual

HOW TO ASSEMBLE
4
Hang Cleaner
3. Store Cord
Pull up on the electrical cord. Push
cord into cord retainer inside upper
cord hook. Wrap cord around upper
and lower cord hooks. Fasten plug to
electrical cord to prevent unwinding.

HOW TO USE

Power Switch

NOTE: On models without the brush roll in the nozzle, the power switch will
have two positions, on and off.
1. Slide the power switch forward to turn on; slide backward to turn off.
2. Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare fl oor
cleaning stops the brush roll. NOTE: Some models do not have a brush roll.
Off Off
Floors Floors Floors Floors Floors Floors Floors
Carpets Carpets
Dual Uses
To operate as a hand To operate as a hand
vac remove the handle vac remove the handle
by releasing the lock by releasing the lock
button.
(continued)
Upper Cord
3
Retaining Hook
To operate as a stick vac To operate as a stick vac
attach the upper handle. attach the upper handle.
3
4. Store Unit
Use the hole in the handle to hang
the cleaner for storage.
Nozzle with Edge Kleener
The nozzle turns down for regular or
low profi le cleaning. Airfl ow under the
nozzle automatically directs suction to
the edges and corners for maximum full
width cleaning.
Lower Cord
Retaining Hook
®
Lock Button Lock Button
5