Getting Started; Set-Up - Aluratek ADMPF210 Instructional Manual

Getting Started

Step 1:
Remove the protective film covering the LCD.
Step 2:
Remove the plastic insulator from the battery on the remote control.
Operations

Set-Up

STEP 1:
Plug the power adapter in then turn the power switch on. A red led indicator light appears when the
unit is powered.
STEP 2:
Please insert your memory card (CF / MS / SD / MMC / XD) at this time. You may also insert a USB
thumb / flash drive into the on-board USB 2.0 port which will be detected automatically and appear on
the screen.
09