Battery Management; Battery Indicator; Charging The Battery - Ematic eGlide XL Pro II User Manual

Battery Management

This device is powered by a rechargeable battery
and is designed and manufactured to be used
and recharged frequently. As with all batteries,
the capacity of the battery reduces each time it is
charged/depleted. However, you can prolong the
battery's lifetime by following the suggestions
below:
• Use your Tablet at least once a week.
• Charge the battery regularly and fully.
• Never leave the battery fully discharged for
a long period of time.
• Always keep the device and the battery
away from heat.
The battery is not fully charged out of the box, so
it is recommended the battery be charged for at
least 4 hours before starting to use the device.
NOTE: The first two times the battery is
charged, it may take as long as 6 hours to
fully activate the battery.
2 | Getting Started

Battery Indicator

The battery icon in the System Bar shows battery
power level.
In the event the battery becomes low on power,
the follow will occur:
• The battery icon will show no power
• Device will power OFF automatically
• Operation buttons will not respond
• Red signal appears in right corner of device
Should any of the above conditions occur,
charge the battery before attempting to use the
device.

Charging the battery

1 Plug the power adapter into an electrical
wall outlet.
2 Connect the power adapter to the device's
power interface port to fully charge the
battery before use (approximately 4 hours).
a. While charging, the battery indicator
light in the system bar will fill and then
drain with an image of a lightning bolt.