Panasonic Toughbook C1 Operating Instructions Manual page 19

NOTE
PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They
are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK]. When you disable the function, information on how to use
the hard disk of PC Information Popup is not displayed.
( Reference Manual "Check the Computer's Usage Status")
To conserve power, the following power saving methods are set at the time of purchase. (When AC adaptor
is connected)
The screen automatically turns off after 15 minutes of inactivity.
The computer automatically enters
*3
Refer to Reference Manual "Sleep/Standby or Hibernation Functions" about resuming from sleep/standby.
Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3 W) simply by
having the AC adaptor plugged into an AC outlet. (When using with 240 V AC)
Precaution against Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Sliding the power switch
Touching the keyboard, touch pad, screen, external mouse, or tablet buttons
Closing the display
Turn on/off the wireless switch
About the battery for this computer
The computer has 2 battery packs. If one of the two battery packs has remaining power, you can replace the other bat-
tery pack without turning off the computer (
Power is consumed only on either battery pack. Charging is made for the two battery packs at the same time.
With the battery charger (optional: CF-VCBC11U), you can remove the empty battery pack from the computer and
charge it while using the computer.
Note about access to the hard disk
<For MUI OS model>
Languages other than the one selected at Windows Setup are uninstalled in the background while the computer stays
idle.
During this period of time, the following issues may occur. These are caused by the specifi cations of Windows 7 and
are not a malfunction.
The uninstall process may continue for approximately 3 hours, during which time the computer may become un-
responsive due to a continuous access to the hard disk, etc. You can restart or shutdown the computer during the
process.
The message "Confi guring Windows features, preparing to confi gure Windows" may appear for up to about 20 min-
utes when shutting down or starting up the computer (including restart). Wait for the computer to shut down or start
up normally.
Once the message is no longer displayed, follow the steps below to delete all but the most recent restore point. If you
do not delete the restore points, the system fi les for languages other than the one selected will remain on the disk as
backup data for the restore points, and the operation of the computer may become unresponsive.
A Click (Start). And input "cleanmgr.exe" in [Search programs and fi les], and then, in the list of results, click
[cleanmgr.exe].
B After a while, the "Disk Clean up for" setting screen appears.
Click [Clean up system fi les] - [More Options] - [System Restore and Shadow Copies] - [Clean up] - [Delete] - [OK]
- [Delete Files].
C Restart the computer.
*3
sleep /
Reference Manual "Battery Power").
*3
standby after 20 minutes of inactivity.
19