Elo TouchSystems MonitorMouse User Manual page 8

Touchscreen driver for os/2
Table of Contents

Advertisement

MonitorMouse for OS/2 will work with the Elo touchscreen controllers listed
below. E281{A}-4002 refers to both the E281-4002 and E281A-4002 controllers.
Likewise, E281{A}-4025 refers to both the E281-4025 and E281A-4025
controllers.
Controller Model
E281-2300
E281{A}-4002
E271-2210
E271-140
E281-4035
E281{A}-4025
E271-2201
E271-141
E271-2202
The following obsolete part numbers may be cross-referenced to some of the
controller model numbers referred to above.
Part Number
00285X-XXX Enclosure
E271-3 Enclosure
002710-XXX Controller
002714-XXX Controller
00285X-2-XXX Controller
00285X-25-XXX Controller
About MonitorMouse for OS/2
Interface
RS-232
RS-232
RS-232
RS-232
PC-Bus
PC-Bus
PC-Bus
PC-Bus
Micro Channel
Controller Model
Contains E281-4002 IntelliTouch
Serial Controller, configured for
Stream Mode, Binary Mode, Z-Axis
Enabled, 9600 Baud.
Contains
Serial Controller, configured for
2400 Baud, 8-Bit Data, Binary
Mode,
Filtered
Mode.
E271-140
Controller
E271-141
Controller
E281-4002
Controller.
E281-4025
Controller.
Touchscreen Type
IntelliTouch
IntelliTouch
AccuTouch
AccuTouch
IntelliTouch
IntelliTouch
AccuTouch
AccuTouch
AccuTouch
E271-140
AccuTouch
Mode,
Stream
AccuTouch
Serial
AccuTouch
PC-Bus
IntelliTouch
Serial
IntelliTouch
PC-Bus
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monitormouse 2.1

Table of Contents