RCA F32690 User Manual page 36

The choices for each screen are." -
Not Connected Choose this if you do not have a component
connected 1;oan antenna or video input on the back of the TV, or if
you don't Want the TV _o tune toa channel when theparticular
component button ispressed.
Channel 2 (SAT/Cable only) Choose this if your component is
connected tothe antenna jack on the back of the TV_ and you want
4o the.TV tC_tune to channel 2when you pressthe specified
component button. Reminder: Make sure the component's Ch 2/3/4
switch is set to channel 2.
Channel 3 Choose this if your component is connectedto the
antenna jack On the back of the TV, and you want the TV to tune to
channel 3 when you press the specified component button..
Reminder: Make sure the components Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the specified component button.
Reminder: Make sure the components Ch 3/4 switch is set to
channel 4.
Video I Input Choose this if your component is connected to the
INPUT1 jacks on the backOf the TV and you want the TV to tune to
VIDI(SVID1 if you used an S-Video cable) input channel when you
press the specified component button.
Video 2 Input Choose this if your component is connected to the
INPUT2 jacks on the back ofthe TV and you want the TVto l:une_:o
VID2 (SVID2 if you used an S-VideO cable) input channel when you
press the specified component button.
TIME MENU
Sleep Timer Displaysa control panel that letsyou selectthe amount
of time you want to give the TV before it shutsitself off.
Schedule Displays a control panel that lets you set up aschedule for
turning the TV on and off automatically. Make sure to turn the
schedule On. The on-screen directions guide you through the steps
needed to set the schedule.
Set Time Displays a control panel that lets you enter the current time.
The on-screen directions guide you through the steps needed to set the
time. If your TV Guide Plus+ system is setup and running then it will
automatically update your time and this option will not be available.
View Warranty Clock Displays the number of hours the TV has been in
operation (,up to5 years)and the date the TV was first turned on.
34 ""