Table of Contents
Advertisement
Setting
the
VCR1
Channel
(auto
tuning)
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling the TV what channel to tune to when you press
the VCR1 button
on the remote. This is called auto tuning.
Indicate which input you used to connect the VCR. If you don't have a
VCR1 component
connected
to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning in the Using the Menus section.)
1.
Press MENU or OK to bring up the VCR1 choice list.
2.
Point to the choice that matches the way you have your VCR
connected
to the TV.
3.
Press MENU or OK to continue.
Setting
the
VCR2 Channel
(auto
tuning)
The next step lets you set the VCR2 channel. When you set the VCR2
channel, you're telling the TV what channel to tune to when you press
the VCR2 button
on the remote.
Indicate which input you used to connect a second VCR. If you don't
have a second VCR component
connected
to the TV, skip this step or
select Not Connectedfrom
the VCR2 Channel choice list. (For more, see
Auto Tuning in the Using the Menu System section.)
17
Advertisement
Table of Contents
