Network Connection - Netopia 8-Port 10/100M User Manual

Rear Panel
1. Uplink
The Uplink port is used to connect to other switches or
hubs. The Uplink port is shared with the port #1.
2. RJ-45 Ports
Eight shielded RJ-45 ports, all come with auto-negotiation
and operate at 10/100Mbps for connection to servers
and hubs. All ports can be configurated for Full/Half-
Duplex mode.
3. Power Connector
For the external 7.5V DC power adapter that connects
to the power outlet.

Network Connection

The following figures illustrate the connections of the 8-
Port N-Way Mini Switch.
PC to Switch
A PC can be connected to the 8-Port N-Way Mini Switch via
a two-pair Category 3/4/5 UTP/STP straight cable. The PC
(equipped with a RJ-45 100/10Mbps jack) should be
connected to any of the eight ports.
The 8-Port N-Way Mini Switch
RJ 45 jack
4