Fairchild SMC/DO-214AB Specification Sheet

Features
•
Glass passivated junction.
•
1500 W Peak Pulse Power capability
on 10/1000 s waveform.
•
Excellent clamping capability.
•
Low incremental surge resistance.
•
Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•
Typical I less than 1.0 A above 10V.
R
•
UL certified, UL #E210467.
1500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings*
Symbol
P
Peak Pulse Power Dissipation on 10/1000 s waveform
PPM
I
Peak Pulse Current on 10/1000 s waveform
PPM
I Non-repetitive Peak Forward Surge Current
FSM
superimposed on rated load (JEDEC method)
Storage Temperature Range
T
stg
Operating Junction Temperature
T
J
*
These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
2001 Fairchild Semiconductor Corporation
SMCJ5.0(C)A - SMCJ170(C)A
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
T
A
Parameter
SMC/DO-214AB
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY.
NO COLOR BAND ON BIDIRECTIONAL
DEVICES.
= 25°C unless otherwise noted
(Note 1)
Value Units
minimum 1500 W
see table A
200 A
-55 to +150
-55 to +150
SMCJ5.0(C)A-SMCJ170(C)A, Rev. C
C
C