Table of Contents
Advertisement
iMPORTANT SAFETY iNSTRUCTiONS
• Outdoor
Antenna
Grounding
-- If an outside
antenna
is connected
to the television
equipment,
be sure the antenna
system
is grounded
so as to provide
some protection
against voltage
surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA
70, provides
information
with regard to proper
grounding
of the mast and supporting
structure,
grounding
of the lead-in wire to an antenna
discharge
unit, size of grounding
conductors,
location
of antenna-discharge
unit, connection
to grounding
electrodes,
and requirements
for the grounding
electrode.
EXAMPLEOF ANTENNAGROUNDINGAS PER
NATIONAL ELECTRICAL CODE,ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND
NEC -- NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
-
POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250, PART H)
(D-4
• Water and Moisture
-- Do not use this product
near water - for example,
near a bath tub, wash bowl, kitchen
sink, or
laundry
tub; in a wet basement;
or near a swimming
pool; and the like.
• Stand -- Do not place the product
on an unstable
cart, stand, tripod
or table. Placing the product
on an unstable
base can
cause the product
to fall, resulting
in serious personal
injuries as well as damage
to the product.
Use only a cart, stand,
tripod,
bracket
or table recommended
by the manufacturer
or sold with
the product.
When
mounting
the product
on a wall,
be sure to follow
the manufacturer's
instructions. Use only the mounting
hardware
recommended
by the manufacturer.
• Selecting
the location
-- Select a place with
no direct
sunlight
and good ventilation.
• Ventilation
-- The vents and other
openings
in the cabinet
are designed
for ventilation.
Do not cover or block these vents
and openings
since insufficient ventilation
can cause overheating
and/or
shorten
the life of the product.
Do not place the
product
on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings.
This product
is not designed
for built-in
installation;
do not place the product
in an enclosed
place such as a bookcase
or rack, unless proper
ventilation
is provided
or the manufacturer's
instructions are followed.
• The Liquid Crystal panel used in this product
is made of glass. Therefore,
it can break when the product
is dropped
or
applied
with
impact. Be careful not to be injured by broken
glass pieces in case the panel breaks.
• Heat -- The product
should
be situated
away from heat sources such as radiators,
heat registers,
stoves, or other
products
(including
amplifiers)
that produce
heat.
• The Liquid Crystal panel is a very high technology
product
with 2,073,600
pixels, giving
you fine picture
details.
Occasionally,
a few non-active
pixels may appear
on the screen as a fixed point of blue, green or red. Please note that this
does not affect the performance
of your product.
• Lightning
-- For added
protection
for this television
equipment
during
a lightning
storm, or when it is left unattended
and
unused
for long periods
of time, unplug
it from the wall outlet
and disconnect
the antenna.
This will prevent
damage
to the
equipment
due to lightning
and power-line
surges.
• Power Lines -- An outside
antenna
system should
not be located
in the vicinity
of overhead
power
lines or other electric
light or power circuits, or where
it can fall into such power
lines or circuits. When
installing an outside
antenna
system,
extreme
care should
be taken to keep from touching
such power lines or circuits
as contact
with them
might
be fatal.
• To prevent
fire, never place any type of candle or flames on the top or near the TV set.
• To prevent
fire or shock hazard, do not expose
this product
to dripping
or splashing.
No objects filled with
liquids,
such as vases, should
be placed
on the product.
• To prevent
fire or shock hazard, do not place the AC cord under the TV set or other
heavy items.
• Turn off the main power
and unplug
the AC cord from the wall outlet
before handling.
• Use a soft cloth and gently wipe the surface of the display
panel. Using a hard cloth may scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped
strongly.)
• If the panel is dusty, use an anti-static
brush,
which is commercially
available,
to clean it.
• To protect
the panel, do not use a dirty cloth, liquid
cleaners or chemical
cloth to clean it, such materials
may damage
the
panel surface.
• Do not display
a still picture for a long time, as this could cause an afterimage
to remain.
• Install the product
on the place where the AC cord can be unplugged
easily from the AC outlet,
or from the AC INPUT
terminal
on the rear of the product.
• When transporting
the TV, never carry it by holding
or otherwise
putting
pressure onto
the display.
Be sure to always carry the TV by two people holding
it with
two hands - one hand on each side of the TV.
• Do not insert foreign
objects
into the product.
Inserting
objects in the air vents or other
openings
may result in fire or electric
shock. Exercise special caution
when using the product
around
children.
Advertisement
Table of Contents
