Connecting A Dvd Player - Samsung LTP227W Owner's Instructions Manual

I INSTALLATION I
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
DVD PlayerRear P_nel TV Rear Panel
Connect a set of audio .... ........... . ..,,
cables between the _ ! L, R AUDIO INPUT
jacks on the TV and
the AUDIO OUT jacks Audio Cable
DVD Player Rear nel TV Rear Panel
Connect a video Cable
between the
COMPONENT1
(Y, Pb, Pr) jacks on
the TV and the Y, Pb,
Pr jacks on the DVD
player.
Note: For an explanation of Component video, see your DVD player owner's manual.
* Each external input source device has a diffeient back panel configuration
Connecting a DVD Player or Set-Top Box to the TV with a DVI-D Cable
DVDPlayerRearPanel TV RearPanel
Connect a DVI-D , .................. "_
i
cable be[ween the ®' ® ® ®®" °_ / i _i
DVI-I INPUT I I ' ®'®'® . , [(
connector on the TV _ €-_
ana the DV[ connector ".[L"
on the DVD player
Set-Tog BOX. DVl-UCable<Optional>
2
Connect a set of audio
cables between the
PC AUDIO INPUT
jack on the TV and the
AUDIO OUTPUT jacks
on the DVD player
Set-Too BOX.
DVD Player Rear Panel
Audio Cable <Optional>
Note: If you are using a DVI-D cable to connect
l. Be sure to connect the audio cable (sold separately) as shown above to get normal TV sound.
2. See Appendix "Display Modes" for supported resolutions.
3. The screen may have shifted to the right or to the left after connecting the cable.
Don't adjust the screen position in a Digital Signal.
4. Each external input Source device has a different back panel configuration.
English- 13