Remote Control - Samsung UN40F6300 E-Manual

Add the External Device
2_
3_
Turn on the external device you wish to set up universal remote function for and then press the
SOURCE button to bring up the Source screen.
Select Universal Remote Setup from the top of the screen. This initiates the universal remote
setup process.
Follow the on-screen instruction and set up the universal remote control. If it does not work, set
up the remote control by entering the model number manually.
Using the Universal Remote Control
By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.
Registered Externa_ Device Management
Universa_ Remote Setup screen, select a registered external device.
o Source Setup: Change the TV's input connector that the external device is connected to.
Synced Power off: Configure the external device to turn off when the TV is turned off.
Rename: Rename the registered external device (up to 15 characters long).
Delete: Remove the registered external device.