Samsung Series 9 9000 UN55C9000 User Manual page 101

Use t he Automatic Network Setup when c onnecting your
TV toanetwork that supports DHCR To set u p your TV's
cable network connection automatically, follow t hese steps:
Netw0rk Setup (Auto) ........................................................................................................................................ Network Setup (Manua{) ............................................................
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your
remote, use the A or _' button to select Setup, and
then press the ENTERE_ button.
3. Use the A or V button to select Network in the Setup
menu, and then press the ENTERI_ button. The
Network screen appears.
4. On the Network screen, select Network Type.
5. Set Network Type to Wired,
6. Select Network Setup. The Network Setup screen
appears.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your TV's cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the "How to set up
automatically" procedure.
2. Set Internet Protocol Setup to Manual.
3. Press the _' button on your remote to go to the first
entry field,
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another,
5. When done, press the RETURN button on your remote.
6. Select Network Test to check the Internet connectivity.
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
English 33