Adjusting The Advanced Picture Settings; Resetting The Picture Settings - Vizio M801d-A3 User Manual

Adjusting the Advanced Picture Settings

To adjust the advanced picture settings:
1. From the Picture menu, use the
Arrow buttons on the remote to
highlight More, then press OK.
2. Use the Arrow buttons on the
remote to highlight Advanced
Picture, then press OK. The
Advanced Picture menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• Auto Brightness Control -
The ambient light sensor
detects the light levels in
the room and automatically
adjusts the backlight for the
best picture. Select Off, Low,
Medium, or High.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Smart Dimming - Improves the contrast ratio of the
screen by adjusting the backlight intelligently. Select On
or Off.
• Smooth Motion Effect - Smooth Motion Effect activates
Motion Estimation/Motion Compensation (ME/MC) to
ensure that on-screen motion is crisp and clear.Select On
or Off.
VIZIO
Advanced Picture
Auto Brightness Control Medium
Black Detail Medium
Smart Dimming On
Smooth Motion Effect Off
Reduce Signal Noise Low
Reduce Block Noise Low
Film Mode Auto
3D
21
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixellation and distortion
for .mpeg files. Select Off, Low, Medium, or High.
• Film Mode - Optimizes the picture for watching film.
Wide Zoom Normal Panoramic
Select Auto or Off.
• 3D - Turns 3D mode on or off.
4. When you have finished adjusting the Advanced Picture
Exit 2D 3D
Settings, press the EXIT button on the remote.

Resetting the Picture Settings

ABC
To reset the picture settings to the factory default settings:
Input Wide CC
1. From the Picture menu, use the Arrow buttons to highlight
More, then press OK.
2. Use the Arrow buttons on the remote to highlight Reset
Sleep
Picture Audio
Timer
Picture Mode, then press OK. The TV displays, "Are you sure
you want to RESET Picture Settings to the factory defaults?"
3. Highlight Yes and press OK.
Network Settings Help
4. Press the EXIT button on the remote.
5