Advertisement
Step
2: Connect
Dipole
Antenna
(Optional)
Follow
the steps to connect
the indoor
antenna
supplied
with
your
TV (only
if you
do not connect
an outdoor
antenna
or a cable-TV
system).
Insert
the dipole
antenna
into the pocketed
slot on the back of your
set.
Stand
at the back of your
set with
the antenna
twin-lead
facing
you,
and
press
the base of the antenna
into the slot until
it locks
in place.
Connect
the ends
of the twin-lead
to the Antenna
Adapter
(optional).
Connect
the Antenna
Adapter
to the ANT. connector
on the back of the TV.
Later, after
you've
turned
on the TV, adjust
the length
and position
of the
antenna
rods
for best reception.
• For viewing
VHF channels,
extend
the rods
fully.
• For viewing
UHF channels,
adjust
the rods
for best reception.
Slot
Dipole Antenna
fwin
Lead
Step 3: Plug in Your TV
Plug the end of the power cord into the wall outlet, matching
the wide blade
of the plug with the wide slot in the outlet. Be sure to insert the plug
completely.
Step 4: Turn on the TV
Press the POWER button on the front panel.
Step 5: Select the TV signal
Press the TV/CATV button on the back of the TV to select the current
antenna type: TV (off-air for UHF/VHF), Standard
cable (STD) IRC cable or
HRC Cable.
Note:
If you have cable-TV and don't know the type, contact your cable
company.
Advertisement
